Automotive
CO₂
visible per car produced
A manufacturer maps CO₂ per vehicle produced. Production lines are benchmarked, delivering measurable, audit-ready sustainability reporting.
Energy management for heavy industry
Maximum capacity,safely within your grid limits.
Electrification drives up your peaks while the grid stays locked. Evogrid controls your furnaces, compressors, storage and on-site generation as one system — the peak flattens, production keeps running at full power.
18%
of the monthly peak proved avoidable at a major steel plant
Every 5 min
a new control schedule based on price, weather and asset status
97–99%
AI forecast on generation, consumption and price
The challenge
Energy is now a production factor.
Simultaneous start-ups set the peak
When furnaces, compressors and cooling power up at once, they lock in your peak rate for the entire month — one unmanaged quarter-hour counts against you for a full year.
Grid upgrades take years
A capacity upgrade takes two to five years and the waiting list only grows — while your electrification roadmap counts in quarters.
15,000+ companies on the waiting list
Every kWh counts twice
Peak rates, reactive power penalties and missed on-site generation feed straight into your cost per unit of product — and grid investments push grid charges up year after year.
€235 billion in grid investments through 2040
The platform
One platform for every asset on your site.
Everything that draws or supplies power connects to the same control layer — and counts in the same control schedule.
Furnaces & process installationsCompressors & compressed airCooling & climateBattery storageRooftop solarCHP & backup powerCharging pointsMeters & submetersSCADA, BMS & ERP integration
Hardware-independent: Evogrid connects via Modbus, OCPP and open APIs to what is already in place. No rip-and-replace, no production stop.
What Evogrid does
What Evogrid does for heavy industry.
One platform monitors and controls every flexible load behind your meter — in real time, within the limits of your process.
Peak shaving at process level
We meter every installation and stagger start-ups automatically, so furnaces and compressors stop driving each other's peaks.
Virtual capacity behind the meter
Battery and on-site generation create extra usable power on your existing grid connection — growth without a grid upgrade.
Reactive power monitored continuously
Automatic alerts catch deviations before month-end — the penalties stop for good.
Energy and CO₂ per unit of production
Cost and emissions per unit produced, from real metering data — ready to use for CSRD and customer reporting.
Faults before they happen
Predictive maintenance on critical installations: a deviation becomes a planned intervention, not a production stop.
Simulated first, then live
A digital copy of your site models every scenario upfront — add a battery, shift a process, use your connection differently. You see the effect before anything changes.
Provable flex, a better grid position
Since July 2026, solutions that relieve the grid get priority from the grid operator. Evogrid makes your flexibility measurable and provable — that is literally your place in the queue.
Real-time insight
You know what you pay. Now you see why.
No monthly invoice after the fact, but a live view of every energy flow on your site.
Costs per installation, per hour
Which furnace, compressor or line costs what — and what your own generation delivers at that same moment.
Cost per installation
€/hour, now
Melting furnace€ 142
Compressor park€ 68
Press line A€ 37
Own generation− € 54
Generation vs. consumption, in real time
See when your site runs on its own power and when the grid steps in — per quarter-hour.
Generation vs. consumption
now · 13:45
Forecast vs. reality
97–99% forecast on consumption, generation and price. Every deviation is a signal, not a surprise on the invoice.
Forecast vs. actual
98.4%actual / forecast
deviation = signal, not a surprise
Reporting & regulation
CO₂ reduction you can prove.
CSRD, EU ETS, ETS2, CBAM: every scheme asks for the same thing — emission figures that survive an audit. Evogrid produces them as a by-product of control, down to asset, shift and product level.
Avoided CO₂, verified
Every control action is measured: the emissions you avoid are provable per intervention — verified metering data, not an estimate after the fact.
Avoided CO₂
3.8tonnes today
verified per interventionCSRD and EU ETS ready
Reports roll auditor-proof out of the meters: energy and CO₂ per site, line and unit of production — ready for the annual report and emissions trading.
Audit-ready per unit
asset · shift · product
CSRDEU ETSETS2CBAMcovered
Melting furnace
morning shift
Press line A
product 7-C
Compressor park
night shift
Real-time Scope 2 — market- and location-based
Your emissions calculated live on the actual power mix (location-based) and on your own contracts (market-based) — per asset, per shift, per product.
Scope 2, computed live
now · 13:45
Ready for ETS2 and CBAM
Gas consumption and emissions visible per process, so the CO₂ price becomes a calculation instead of a surprise — and your CBAM evidence for the supply chain is ready to go.
Ready for ETS2 & CBAM
gas use per process
measured
CO₂ price
€ 82 / t
no surprise, a calculation
CBAM evidence · auditor-proof
At Evogrid, compliance is not a project — it is a by-product of the same metering data you control with.
Why Evogrid
Not another dashboard. A control layer with hands.
Many EMS platforms measure. Some control. Evogrid covers the whole spectrum — from forecast to field engineer, from meter to annual report.
Control and execution
When the platform spots a faltering installation, the work order for the right engineer is already waiting. Predictive maintenance and field service are built in — no second supplier needed.
From meter to annual report
Submetering, cost allocation per unit of production and CSRD reporting in the same platform. No exports to separate tooling, no consultants in between.
Forecast-first, no emergency brake
97–99% accurate forecasting steers ahead; reactive throttling is the safety net, never the strategy. Your process notices the difference.
From one site to your whole portfolio
The same control layer for one plant or forty sites — proven up to chains with thousands of locations.
The solutions behind it
Built on the same building blocks as the rest of the platform.
How it works
Prove it first, then build.
No experiments on your production line. The same five steps as on every Evogrid site — the optimization is proven before a single installation runs differently.
- 01
Business case & simulation
We build a digital copy of your plant on your own consumption, generation and contract data — the business case is on the table upfront.
- 02
Implementation & data collection
We connect furnaces, compressors, storage and meters via Modbus, OCPP and APIs — without interrupting the process.
- 03
Forecasting
AI predicts consumption, generation and price with 97–99% accuracy — per installation, per quarter-hour.
- 04
Optimization
A new control schedule every 5 minutes, based on price, weather and asset status. Automatic, within your limits.
- 05
Control, management & overview
Production keeps running; you keep hold of the limits. Peak down, output unchanged — and everything traceable in a single view.
Frequently asked questions
The tough questions first, then the signature.
EGOS intervenes in your primary process — so by all means ask the hard questions. These are the answers we give most often.
Curious what this deliversin your industry operation?
We model it on your own data and show the returns upfront. Then you decide.